91%N 9%SP 4 Way Stretch Breathable Outdoor Elastic Fabric For
Mountaineering Pants Suit
1 . Descriptions:
For this fabric, we prepare about 31 colors in stock, and all these
are high quality. So you can choose colors and we can send you for
sampling.This content is 91% nylon 9% spandex.The yarn count is
70/40*70/40. We finish this fabric dyed.So this fabric is
breathable and has soft handfeel. According to your special
requirements, we can do many finishing like bonding,
cire,lamination and etc.Also this fabric has many choices of color.
2 . Specifications:
| Name | 4 Way Stretch Elastic Fabric For Mountaineering Pants Suit |
| Material | 91%N 9%SP |
| Backing | Dyeing |
| Weight | 200g |
| Width | 150cm |
| Color | various colors available |
| Standard | can meet REACH,ROHS,EN71-3 |
| MOQ | 1000M |
| Packaging | by rolls as 50m or according to your requirements,polybags,vacuum
packing |
| Payment term | T/T |
3 . Quality Control-Scoring Standard:
The four-point scale can be used for woven knit fabrics.
1. Points for latitude and longitude and other directions will be
evaluated according to the following criteria:
2. The principle of scoring:
A. All the warp and latitude points in the same code shall not
exceed 4 points.
B. For serious holes, they will be rated as four points. The
defects will be rated four points per yard. For example: regardless
of the diameter, all the holes, broken
C. For consecutive defects, such as: crosspiece, edge to edge
chromatic aberration, narrow or irregular cloth width, crease,
uneven dyeing, etc., each code point should be rated as four
points.
D, there is no penalty within the cloth edge 1"
E. Regardless of the warp or latitude, no matter what the disease
is, it is based on the principle of being visible, and the correct
deduction is given according to the score.
F. In addition to special regulations (such as coated tape), it is
usually only necessary to test the front side of the grey fabric.
4 . Checkpoints, Other Factors of Scoring:
1. Repeated offenses
1) Any repeated or continually appearing defects will constitute a
recurring defect. Four points must be imposed for repeated
violations of each code.
2) Regardless of the score of the defect, any volume with more than
ten yards of cloth containing repeated defects shall be classified
as unqualified.
2. Full width width
1) A roll containing more than four full width defects per 100 y2
shall not be rated as a first class product.
2) A volume containing more than one major defect per 10 linear
line numbers will be determined as unqualified, regardless of how
many defects are contained within 100y.
3) Rolls containing a major defect in the cloth head or tail 3y
shall be assessed as unacceptable. Major defects will be considered
as a three- or four-point defect.
4) If the cloth has obvious loose or tight lines on a selvedge, or
wrinkles, wrinkles, creases or creases appear on the main body of
the fabric, these conditions cause the cloth to be uneven when the
cloth is unfolded in the normal way. Such a volume cannot be rated
as a first-class product.
5 .More pictures:
